Primer

At a glance

• Fast drying general purpose Zinc Phosphate primer
• Overcoatable with a range of Q.D. finishes
• Excellent protection of bare steel and fabrications
• Quality blast primer

Intended Uses

General purpose anti-corrosive metal primer, giving a high build matt finish. Can be re-coated with most types of finish. Good resistance to salt spray, humidity etc.

Details

Colour

Available in Red Oxide (0120), Light Grey (0651), Dark Grey (1606), Buff (0414), White (0001) and Black (0002), plus special colours by arrangement.

Gloss Level

Matt

Solids by Weight

Nominally 56%, varying slightly with colour.

Recommended Film thickness

Typical dry film thickness when applied is 75 microns.

Theoretical Coverage

Approx 5.5 square metres per litre at 75 microns dft. NB. The practical coverage rate depends on many factors and will be less than the theoretical figure.

Method of Application

Airless spray, air assisted airless spray (15-17 thou tip), conventional spray (with thinning). Small areas may be brushed.

Drying Time

Touch Dry ……. 15 minutes.
Handle Dry ….. 1 – 2 hours.
Full Cure ……… 7 days
Drying times are quoted at 20°C and will vary with actual conditions such as: film thickness, air movement, temperature and humidity.

CLICK HERE FOR SABRE FERRUM PRIME (ALL COLOURS) TECHNICAL DATA SHEET

CLICK HERE FOR SABRE FERRUM PRIME (ALL COLOURS) SAFETY DATA SHEET